Sprinkler Controllers

Sprinkler SuperStore

Lawn sprinkler system - controllers

Toll Free 1-866-401-8150

Sprinkler Controllers Irrigation Timers Sprinkler Clocks

Sprinkler System Controller Manuals

HUNTER Manuals	RainBird Manuals
EC Manual	EC Manual
SRC Manual	ESP Manual
ProC Manual	ESP-Si Manual
ICC Manual	ESP-LX Manual
	RC Manual
	Easy Rain Manual

Controllers

Automatic Timers and Controllers for Lawn Sprinklers Systems come in models with various stations.
A 4 station Controller will run 4 watering areas or Zones, a 6 station Controller will run 6 Zones, etc.
They are extremely flexible allowing you to vary the Start times, Zone run times and days to water for each Zone.
It may take a little time to get familiar with the operational programming procedure, but the instructions are clear and, as with all computer products.

Installing your new Controller.

Wiring the Controller is one of the most difficult irrigation tasks.
Personal satisfaction is assured upon your first activation, and it can be done with no electrical knowledge.

Safety First.

Always have the mains power disconnected and no battery back-up installed.
The output from the Controller is 24 volts.
Follow the installation instructions provided with the Controller to make sure that the wires are connected to the correct terminals and always use a Gel-Filled connector to create a positive waterproof connection.

Controller to Valve wiring.

A good quality, Gopher-Proof Direct Bury wire is necessary. Accept no substitutes! We suggest you even add a few extra wires just in case.

Controllers Manuals.

Keep your manual inside the controller, along with the records of the last battery change and your maintenance record of cleaning around your lawn sprinklers pop-ups.
The maintenance of your spray-heads is important, especially if they are located near the road or footpath