• Precipitation rate: .37 to .72 inches per hour
  (9 to 18 mm/h)
• Radius: 15 to 35 feet (4,6 to 10,7 m)
• Radius may be reduced up to 35% with Radius Reduction Screw
• Pressure: 25-55 psi (1,7 to 3,8 Bars)
• Flow Rate: .54 to 4.6 gpm (,12 to 1,04 m 3/h)
• 1/2" NPT female bottom threaded inlet
• Reversing Full-and Part-circle adjustment 40° – 360°

• Pop-up height shrub: 4" (10,2 cm)
• Overall body height shrub: 6.6" (16,8 cm)
• Exposed surface diameter: 1.16" (2,9 cm)
  Note: Pop-up height measured from cover to center of nozzle. Overall body height is measured popped down.

• Precipitation rate: .37 to .72 inches per hour
  (9 to 18 mm/h)
• Radius: 15 to 35 feet (4,6 to 10,7 m)
• Radius may be reduced up to 35% with Radius Reduction Screw
• Pressure: 25-55 psi (1,7 to 3,8 Bars)
• Flow Rate: .54 to 4.6 gpm (,12 to 1,04 m 3/h)
• 1/2" NPT female bottom threaded inlet
• Reversing Full-and Part-circle adjustment 40° – 360°

• Precipitation rate: .20 to 1.04 inches per hour (5 to 27 mm/h)
• Radius: 23 to 50 feet (7,0 to 15,2 m)
• Radius may be reduced up to 25% with radius reduction screw
• Pressure: 25-65 psi (1,7 to 4,5 Bars)
• Flow Rate: .69 to 8.41 gpm (,16 to 1,91 m 3/h)
• 3/4" (20/27) NPT female bottom threaded inlet
• Reversing full-and part-circle adjustment 40° – 360°
• Full circle only adjustment 360°

• Optional Pre-installed Rain Curtain™ nozzles
• Optional Seal-A-Matic (SAM) check valve holds back up to 7 feet (2,1 m) of elevation change, to prevent puddling and erosion caused by low head drainage
• Optional non-potable cover for easy identificaion of reclaimed water
  

The 5000 Plus Series Rotor is available in 4", 6", 12", Shrub, and Stainless Steel models.

The convenience of flow shut-off is a key benefit of the 5000 Plus rotor

Specifications:

• Radius: 39 to 71 feet (11,9 to 21,7 m)
• Pressure: 50 to 90 PSI (3,5 to 6,2 Bars)
• Flow: 3.8 to 22.2 GPM (0,86 to 5,04 m³/h; 0,24 to 1,40 l/s)
• 1" (26/34) female NPT or BSP threaded inlet
• SAM check device holds up to 10 feet (3,1 m) of elevation change
• Rain Curtain nozzles: 04-black; 06-light blue; 08-dark green; 10-gray; 12-beige; 14-light green; 16-dark brown; 18-dark blue
• Nozzle outlet trajectory is 25°

• Precipitation Rate: 0.28 to 1.17 inches per hour (7 to 30 mm/h)
• Radius: 22 to 45 feet (6,7 to 13,7 m)
• Radius with Radius Reduction Screw: 18 ft (5,4 m)
• Pressure: 25 to 60 psi (1,7 to 4,1 Bars)
• Flow: 1.5 to 8.4 GPM (0,34 to 1,91 m³/h; 0,9 to 0,53 l/s)
• Combination 1/2" (15/21) or 3/4" (20/27) FPT bottom inlet
• 1/2" (15/21) FPT side inlet
• Nozzles: 06-red; 07-black; 08-blue; 10-yellow; 12-beige
• Low angle (LA) nozzles: 07 LA-black; 10 LA-yellow
• Nozzle outlet trajectory is 23° for 06, 07, 08, 10, and 12 nozzles.
• LA nozzle outlet trajectory is 11°.