Xerigation (Rain Bird)

1800 Spray Head Retro-Fit Kit

1800 Spray head Retro-Fit Kit
Permits convenient conversion to drip tubing when used with compression adapter. Provides 30 psi (2,0 Bars) pressure regulation and 200-mesh (75 micron) screen that is easily accessible. Internal assembly drops into any 1804, 1806, or 1812 spray head body to easily retrofit existing system to Xerigation products. Can be installed above or below grade. If retrofit flow is less than 3 GPM, replace electronic valve with Rain Bird Control Zone Kit.

retro-1800
Weight: 2.00 lbs

Multi-Outlet Pressure Compensating Emitters

Multi-Outlet Xeri-Bug™

Pressure compensating design delivers uniform flow throughout a wide pressure range (15 to 50 psi; 1,0 to 3,5 Bars).
Six-outlet emitter supplied with one outlet opened. Carefully clip the outlet tips open with snips or clippers for additional operational ports.
Barbed outlets retain 1/4" distribution tubing.
Self-flushing action minimizes clogging.
Durable, UV-resistant plastic housing.

Six Outlet Distribution Manifold

Six-Outlet Distribution Manifold
6 Outlet Barb X 1/2" FPT Inlet (Grey)

EMT6X
Weight: 0.25 lbs

Xeri-Bird 8 Outlet Emmission Device

Xeri-Bird Head Assembly w/8 Emmiters or Without (order separately)
Pressure Regulator Sold Separately

Retrofit Pressure Regulator

Retrofit Pressure Regulator
Provides convenient 30 psi (2,0 Bars) pressure regulation at the riser for any 1/2” FPT emission device or compression adapter. Can be installed above or below grade.

PRS-050
Weight: 1.00 lbs

Xeri Bug Emitters

Xeri-Bug Emitters

XB-05 - .05 GPH - (Blue)
XB-10 - 1.0 GPH - (Black)
XB-20 - 2.0 GPG - (Red)

Pressure Compensating Emitters

Pressure Compensating Emitters deliver uniform flow from 10-50psi

Models

PC-05 - 5 GPH - Lt. Brown
PC-10 - 10 GPH - Green

Xerigation In-Line Filters

Xerigation In-Line Filters
Glass-filled nylon construction provides 150 psi pressure rating and permits filter installation upstream of irrigation control valve. Replacement filter elements are constructed of polyester mesh welded to a color-coded polypropylene frame. Filter elements are available in three configurations: 200-mesh (75-micron); 150-mesh (100-micron) and 100-mesh (150-micron) models. Cap, with sealing o-ring, unthreads to provide access to filter element for ea

In Line Pressure Regulator

In-Line Pressure Regulators
Can be installed above or below the ground. Preset outlet pressures: 30 psi (2,0 Bars), 40 psi (2,8 Bars), 50 psi (3,5 Bars). 3/4" (20/27) or 1" (26/34) female-threaded inlet and outlet.

Xerigation Control Kits

Xerigation Control Zone Kits
Complete kit provides automatic control of a drip zone when irrigation control valve is connected to a timer. Kit includes the following 1" (26/34) components: (1) FPT ball valve, (1) 100-DV remote control valve, (1) RBY-100-200MX in-line filter, (1) PSI-M40X-100 pressure regulator and (3) schedule 80 close nipples.

Tubing Goof Plug

Tubing Goof Plug - 5/pack
New design works with XM-Tool to speed emitter removal and plugging of unwanted holes.(5/pack)

ema-gpx
Weight: 1.00 lbs

Xeri Tube Heavy Wall Tubing

Xeri-Tube 700 Heavy Wall Tubing
Extruded from the finest linear, low-density, UV-resistant polyethylene resin materials. Manufactured under strict ASTM test methods with certified Union Carbide Fingerprint trace element to ensure highest quality. Thick-walled, flexible tubing resists kinks and damage caused by routine landscape maintenance activities. Fits into any Rain Bird Xerigation 700 Series 1/2" (15/21) compression fitting or flush cap. Fits over barbed inlet on the Xeri-Stake™ for Xeri-Bubbler™ and Xeri-Spray™ applications.

xt-700

1\4" Vinyl Distribution Tubing

1/4 Vinyl Distribution Tubing
Extends emitter outlets to desirable discharge locations. Fits over barbed outlet ports on all Xerigation emission devices and 1/4" transfer fittings. Made from flexible polyvinyl materials.

dt-025

1\4 Stake

1/4 Stake
TS025 - Constructed of UV-resistant plastic material. Used for holding 1/4" vinyl distribution tubing (DT-025) in place at the plant root zone.

ts025
Weight: 1.00 lbs

Xeriman Tool

Xeriman Tool
Provides fast, easy, one-step installation of Xeri-Bug™ emitters and PC Modules directly into 1/2" or 3/4" drip tubing such as Xeri-Tube (XT-700).

xm-tool
Weight: 1.00 lbs